|
GTT ONSET
GTT Onset is the integration of the technical and professional services of Global Testing Technologies and Onset Technologies, operating as a single market identity as of January 1, 2007. Customers of both organizations will benefit from overall service enhancements, as the two customer focused business cultures are combined to better serve a growing list of customers. Established in 1986, Global Testing Technologies (GTT) is a full service non-destructive testing company, providing both on-site and in-shop service. Onset Technologies technical and professional services provide reliability and engineering support to a broad range of industries. visit website
POCONO FABRICATORS
In the 1880’s, Patterson-Kelley began manufacturing commercial / industrial water heaters. Originally, tanks were unlined. They were fabricated out of 1” thick steel to allow for corrosion. They would rust, causing water to discolor and have a metallic taste. To reduce this problem a simple sand and cement type lining was troweled onto the tank shell. This did not offer a long term solution. In order to produce a better product, an R&D project was initiated to formulate a material that would extend the service life of a potable water tank/heater. This led to the development of C-17 in the early 1940’s. As water technology advanced, water additives were introduced to make the supply water either harder, softer, chlorinated, fluorinated etc.. Some of these conditions caused deterioration in C-17. Again, an R&D initiative was implemented that led to the development of G-8 in the late 1960’s. G-8 eliminates portland (limestone based) cement, and replaces it with a alumina (bauxite) based cement. G-8 proved to be a dynamic improvement over all other products used to protect commercial water heaters. There were many requests for the product to repair and reline existing water heaters, Pre-Krete G-8 was sold to hospitals, schools, high rise buildings etc. In order to increase business in this market, a Distributor, Applicator Network was established. Pocono Fabricators was established as a separate entity and it was determined to enter this market aggressively as Pocono Fabricators, Pre-Krete Cements. visit website
CLEMMER STEELCRAFT TECHNOLOGIES
An industry leader in storage containment. We have built our reputation on the strength of our engineering and the superior reliability of our storage containment products - silos, tanks and pressure vessels. Check out our wide range of standard products, and all the options for custom-design. Discover a performance history that's helped to define our business. A company-wide standard of service beyond your expectations. An unparalleled commitment to quality. visit website
| Links
| |
 |
GTT OnSET
GTT Onset is the integration of the technical and professional services of Global Testing Technologies and Onset Technologies, operating as a single market identity as of January 1, 2007. Customers of both organizations will benefit from overall service enhancements, as the two customer focused business cultures are combined to better serve a growing list of customers. Established in 1986, Global Testing Technologies (GTT) is a full service non-destructive testing company, providing both on-site and in-shop service. Onset Technologies technical and professional services provide reliability and engineering support to a broad range of industries. |
 |
Pocono Fabricators
In the 1880’s, Patterson-Kelley began manufacturing commercial / industrial water heaters. Originally, tanks were unlined. They were fabricated out of 1” thick steel to allow for corrosion. They would rust, causing water to discolor and have a metallic taste. To reduce this problem a simple sand and cement type lining was troweled onto the tank shell. This did not offer a long term solution. In order to produce a better product, an R&D project was initiated to formulate a material that would extend the service life of a potable water tank/heater. This led to the development of C-17 in the early 1940’s. As water technology advanced, water additives were introduced to make the supply water either harder, softer, chlorinated, fluorinated etc.. Some of these conditions caused deterioration in C-17. Again, an R&D initiative was implemented that led to the development of G-8 in the late 1960’s. G-8 eliminates portland (limestone based) cement, and replaces it with a alumina (bauxite) based cement. G-8 proved to be a dynamic improvement over all other products used to protect commercial water heaters. There were many requests for the product to repair and reline existing water heaters, Pre-Krete G-8 was sold to hospitals, schools, high rise buildings etc. In order to increase business in this market, a Distributor, Applicator Network was established. Pocono Fabricators was established as a separate entity and it was determined to enter this market aggressively as Pocono Fabricators, Pre-Krete Cements. |
 |
Clemmer Steelcraft Technologies
An industry leader in storage containment. We have built our reputation on the strength of our engineering and the superior reliability of our storage containment products - silos, tanks and pressure vessels. Check out our wide range of standard products, and all the options for custom-design. Discover a performance history that's helped to define our business. A company-wide standard of service beyond your expectations. An unparalleled commitment to quality. |
|
